Cara Seting Load Balance Mikrotik 2 ISP

“Cara Seting Load Balance Mikrotik 2 ISP”

Pengantar

Cara Seting Load Balance Mikrotik 2 ISP. Disini ada 2 ISP berbeda yang digunakan, yaitu Bandwith ISP A 1024 Kbps Sedangkan ISP  B 256 Kbps 1:8 Tetapi di sini kita akali menambah satu fake ISP untuk seimbangkan akses Langsung. 

Cara Seting Load Balance Mikrotik 2 ISP

Berikut langkah-langkah nya :
Pake WinBox masuk ke -> IP -> Address -> klik [+] -> isikan Address : 192.168.1.1/24 Network : 192.168.1.0
Broadcast : 192.168.1.255 -> Konfigurasi LAN ( Local)
Interface : Ether1

-> klik [+] -> isikan Address : 192.168.2.2/24
Network : 192.168.2.0
Broadcast : 192.168.2.255 -> Konfigurasi WAN 1 (ISP A)
Interface : Ether2

-> klik [+] -> isikan Address : 192.168.3.2/24  Network : 192.168.3.0
Broadcast : 192.168.3.255 -> Konfigurasi WAN 2 (ISP B)
Interface : Ether3

Buat Mangle. Pake WinBox pilih -> New Terminal
Silakan copy dan paste script berikut :

/ip firewall mangle [lalu enter]

add chain=prerouting in-interface=”ether1″ connection-state=new nth=2,2,0 action=mark-connection new-connection-mark=lb_1 passthrough=yes comment=”LB Client” disabled=no
add chain=prerouting in-interface=”ether1″ connection-mark=lb_1 action=mark-routing new-routing-mark=route_lb_1 passthrough=no comment=”” disabled=no
add chain=prerouting in-interface=”ether1″ connection-state=new nth=2,2,1 action=mark-connection new-connection-mark=lb_2 passthrough=yes comment=”” disabled=no
add chain=prerouting in-interface=”ether1″ connection-mark=lb_2 action=mark-routing new-routing-mark=route_lb_2 passthrough=no comment=”” disabled=no
add chain=prerouting in-interface=”ether1″ connection-state=new nth=2,2,2 action=mark-connection new-connection-mark=lb_3 passthrough=yes comment=”” disabled=no
add chain=prerouting in-interface=”ether1″ connection-mark=lb_3 action=mark-routing new-routing-mark=route_lb_3 passthrough=no comment=”” disabled=no

Buat NAT. Pake WinBox pilih -> New Terminal
Copy dan paste lagi script berikut :

/ ip firewall nat
add chain=srcnat out-interface=”ether3″ action=masquerade comment=”” disabled=no
add chain=srcnat out-interface=”ether2″ action=masquerade comment=”” disabled=no

Buat Route. Pake WinBox pilih -> New TerminalCopy dan paste lagi script berikut :

 / ip route
add dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=255 target-scope=10 routing-mark=route_lb_1 comment=”” disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.3.1 scope=255 target-scope=10 routing-mark=route_lb_2 comment=”” disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=255 target-scope=10 routing-mark=route_lb_3 comment=”” disabled=no
add dst-address=0.0.0.0/0 gateway=192.168.2.1 scope=255 target-scope=10 comment=”default routing connection” disabled=no

Sumber : https://mikrotikindo.blogspot.com/2014/02/seting-load-balance-mikrotik-2-isp.html

Penutup

Sahabat Blog Learning & Doing demikianlah penjelasan mengenai Cara Seting Load Balance Mikrotik 2 ISP . Semoga Bermanfaat . Sampai ketemu lagi di postingan berikut nya.